[Layout] Sheet - Canon UFR II User Manual

[Layout] Sheet

You can select a layout or set page modifications when printing.
[Booklet Printing]
Prints with the pages of a document arranged so that it can be folded in half to create a booklet.
[Details]
Enables you to configure detailed settings when performing booklet printing such as the opening direction
and gutter width.
☞
[Booklet Settings] Dialog Box
[Binding]
Specifies whether a document opens to the right or left when creating a booklet.
[Gutter Width]
Specifies the gutter width.
[Divide into sets for booklet layout]
Creates a booklet in multiple sets. Select whether to automatically or manually divide into sets in [Divide into
Sets]. If dividing manually, specify how many pages are in each set in [Sheets per Set].
[Use creep (displacement) correction]
Corrects displacement between outer and inner pages that occurs during booklet printing. Select a
correction method from [Correction Method]. If correctly manually, specify a correction amount in
[Correction Amount].
[Saddle Press]
Performs saddle press processing when creating a saddle stitched booklet. You can specify the force of
saddle pressing in [Saddle Press Adjustment].
NOTE
● [Main] or [Layout] sheet > [Booklet Printing] cannot be set at the same time as the following settings.
- Settings other than [Covers] sheet > [Configure front cover settings] > [Front Cover] > [Leave blank]
- [Covers] sheet > [Configure back cover settings]
[Perfect Binding]
Applies glue to the gutter side of the contents and encloses them in a cover to create a booklet.
[Details]
Enables you to configure detailed settings when performing booklet printing such as the opening direction
and paper size.
☞
[Perfect Binding Settings] Dialog Box
[Binding]
Sets whether a document opens to the right or left when creating a booklet.
[Perfect Binding Cover Settings]
Sets a paper size and paper source for the cover. If you are printing on the cover, set [Cover Printing].
[Content Page Settings]
Sets a paper size for the content pages.
[Finishing Settings]
Specifies a finished size and adjustment method from [Specify By].
Settings List
118