Table of Contents
Advertisement
1. TEST KEY PROGRAM CHECK
You can check the operating of each load by using the self-diagnosis program.
(a) OPERATION CHECK
1) When power is supplied while pressing the TIMER UP PAD ( ▲ ) and TIMER DOWN PAD ( ▼ ) at the same
time, the self-diagnosis program will start.
2) After checking 1), press the START pad, then the process will advance as follows.
3) After 60 seconds from the starting points of processing, or if the CANCEL(STOP) pad is pressed, the self-
diagnosis program will be canceled.
(b) BAKING PROCESS CHECK (for the only Russian Cook)
1) When power is supplied while pressing the START pad and CANCEL(STOP) pad at the same time,
the self-diagnosis program will start.
2) After checking the REMAINING TIME (
3) The breadmaker starts to operate and the baking process will advance as followsl.
Baking
Time
Mix
Process
set
REMAIN-
11:AA
3:40
ING Time
Baking
Process
-
indicator
(OPTION)
4) During checking 3), if the START pad was not pressed, the process will advance will advance to the next
process according as time pass.
5) After checking 4), press the CANCEL(STOP) pad to cancel the self-diagnosis program.
displayed with beeps), press the START pad.
1st
2nd
Rest
1st Rise
Knead
Knead
3:38
3:33
3:28
KNEAD
KNEAD
Gas
Gas
2nd Rise
Squeeze
Squeeze
3:16
2:37
2:36
2:11
RISE
-9-
3rd Rise
Bake
Cool
2:10
1:10
0:20
BAKE
COOL
Warm
End
[:H]
END
-
-
Hide quick links:
Advertisement
Table of Contents
