Advertisement
1
UNPACKING
Unpack carefully. This is electronic equipment and should be
handled with care.
Check for the following items:
•Verify the unit model number.
•Keyboard cable (part# 303-0239-001).
If an item appears to have been damaged in shipment, replace it
properly in its carton and notify the shipper. If any items are
missing, notify your Philips Communication, Security &
Imaging, Inc. Sales Representative or Customer Service
Representative.
The shipping carton is the safest container in which the unit
may be transported. Save it for possible future use.
2
SERVICE
If the unit ever needs repair service, the customer should contact
the nearest Philips Communication, Security & Imaging Service
Center for authorization to return and shipping instructions.
Service Centers
U.S.A. & Canada: 800-366-2283
Mexico & Central America: 52-5-564-2726
Europe & Middle East: 011-32-1-440-0711
South America: 54-11-4956-0837
Asia Pacific Region: 011-65-481-4422
3935 890 09113 00-25
Printed In U.S.A.
2000 Philips Electronics N.V.
2000 Philips Communication, Security & Imaging, Inc.
All Rights Reserved. Philips
Philips Electronics N.V.
Data subject to change without notice
3
DESCRIPTION
The LTC 2601/00 and LTC 2602/00 are full function
keyboards designed for system control, programming, and
pan/tilt/zoom operation with the LTC 2600 Series Enhanced
Model Multiplexers. The instructions for installing and
operating the LTC 2601/00 and LTC 2602/00 Keyboards are
included in the instructions for use for the LTC 2600 Series
Video Multiplexers.
4 INSTALLATION
1. Install one end of the KB cable RJ-11 connector to the back
of the LTC 2601/00 or LTC 2602 Keyboard.
2. Insert the one end of the Keyboard Cable into the input
port.
Note: 390 Ohm terminate resistor must be connected to
the output port.
5
OPTIONS
• LTC 8558/00 Keyboard Extension Kit: Required for
distances from 10 to 100 ft.
• LTC 8557/60 Keyboard Extension Kit: Required for
distances over 100 ft.
is a registered trademark of
Advertisement
