Related Manuals for LG 42LA6900
Summary of Contents for LG 42LA6900
- Page 1 OWNER’S MANUAL LED TV * LG LED TV refers to an LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 42LA6900 42LA7400 47LA6900 47LA7400 www.lg.com...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS SafEty INStructIoNS Please read these safety precautions carefully before using the product. WARNING Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may Do not place the TV and remote result in fire due to over-heating. control in the following environments: - A location exposed to direct sunlight - An area with high humidity such as...
- Page 3 IMPORTANT SAFETY INSTRUCTIONS Do not allow a impact shock or any If you intend to mount the product to a wall, attach VESA objects to fall into the product, and standard mounting interface (optional parts) to the back do not drop onto the screen with of the product.
- Page 4 IMPORTANT SAFETY INSTRUCTIONS Periodically examine the cord of your appliance, and if its Refer all servicing to qualified service appearance indicates damage or deterioration, unplug it, personnel. Servicing is required when discontinue use of the appliance, and have the cord replaced the apparatus has been damaged in with an exact replacement part by an authorized servicer.
-
Page 5: Viewing 3D Imaging
3D Cautions when using the 3D glasses content. Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. Symptoms which require discontinuation or Do not use 3D glasses instead of your normal refraining from watching 3D content glasses, sunglasses or protective goggles. -
Page 6: Licenses
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to ‘opensource@lge.com’. This offer... -
Page 7: Table Of Contents
TABLE OF CONTENTS taBLE of coNtENtS SafEty INStructIoNS rEMotE coNtroL Viewing 3D Imaging MaGIc rEMotE coNtroL LIcENSES fuNctIoNS Registering Magic Remote Control oPEN SourcE SoftWarE NotIcE How to use Magic Remote Control Precautions to Take when Using the Magic Remote Control taBLE of coNtENtS uSING tHE uSEr GuIdE INStaLLatIoN ProcEdurE... -
Page 8: Installation Procedure
INSTALATION PROCEDURE / ASSEMBLING AND PREPARING INStaLLatIoN ProcEdurE Open the package and make sure all the accessories are included. Attach the stand to the TV set. Connect an external device to the TV set. Make sure the network connection is available. You can use the TV network functions only when the network connection is made. - Page 9 ASSEMBLING AND PREPARING Magic Remote Control, Remote control, Batteries (AAA) Owner’s Manual Batteries (AA) (See p. 27) (See p. 29) Cinema 3D Glasses Stand Screws Cable Holder The number of 3D glasses may 4 EA, M4 x 20 (See p. 15) differ depending on the model (See p.
-
Page 10: Optional Extras
These devices only work with certain models. The model name or design may be changed manufacturer’s circumstances or policies. AN-MR400 AG-F*** AG-F***DP Magic Remote Cinema 3D Glasses. Dual Play Glasses. Tag On AN-VC4** Tag On LG Audio device Video Call Camera Wall mount bracket LSW430B... -
Page 11: Parts And Buttons
ASSEMBLING AND PREPARING Parts and Buttons Screen SETTINGS INPUT Buttons Speakers Remote control senser Logo light Button Description (^ / v) Scrolls through the saved channels. Adjusts the volume level. (+ / -) (OK ⊙ ) Selects the highlighted menu option or confirms an input. Accesses the main menus, or saves your input and exits the menus. -
Page 12: Lifting And Moving The Tv
ASSEMBLING AND PREPARING Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. CAUTION Avoid touching the screen at all times, as this may result in damage to the screen. -
Page 13: Setting Up The Tv
ASSEMBLING AND PREPARING Setting up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. CAUTION When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. -
Page 14: Mounting On A Table
ASSEMBLING AND PREPARING Mounting on a table Adjusting the angle of the TV to suit view Swivel 10 degrees to the left or right and adjust the Lift and tilt the TV into its upright position on a table. angle of the TV to suit your view. 10 cm - Leave a (minimum) space from the wall for... -
Page 15: Tidying Cables
ASSEMBLING AND PREPARING Securing the TV to a wall (optional) Tidying cables (Depending on model) Gather and bind the cables with the cable holder on the back of the TV. Insert and tighten the eye-bolts, or TV brackets and Cable Holder bolts on the back of the TV. -
Page 16: Mounting On A Wall
Mounting on a wall CAUTION Disconnect the power first, and then move or An optional wall mount can be used with your LG install the TV. Otherwise electric shock may occur. Television. Consult with your local dealer for a wall... -
Page 17: Making Connections
MAKING CONNECTIONS MaKING coNNEctIoNS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device. NOTE If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. -
Page 18: Connecting To A Hd Receiver, Dvd Player, Or Vcr
MAKING CONNECTIONS Connecting to a HD receiver, DVD Player, or VCR Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. -
Page 19: Dvi To Hdmi Connection
MAKING CONNECTIONS DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. NOTE When using the HDMI/DVI cable, Single link is only supported. -
Page 20: Connecting To A Mobile Phone
MAKING CONNECTIONS Connecting to a mobile phone Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. NOTE Connect the mobile phone to the HDMI IN 3 (MHL) port to view the phone screen on the TV. This only works for the MHL-enabled phone. -
Page 21: Component Connection
MAKING CONNECTIONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. NOTE If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color. Check to ensure the cables are matched with the corresponding color connection. -
Page 22: Composite Connection
MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE Check to ensure the cables are matched with the corresponding color connection. YELLOW WHITE PC-AUDIO IN... -
Page 23: Connecting To A Pc
MAKING CONNECTIONS Connecting to a PC NOTE It is recommended to use an HDMI connection for the best image quality. Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. - Page 24 MAKING CONNECTIONS Method B: dvI to HdMI connection Choose any HDMI input port to connect. It does not matter which port you use. (*Not Provided) WHITE (*Not Provided) AUDIO OUT DVI OUT PC-AUDIO IN (PC) (PC) (RGB/HDMI-PC) (RGB/HDMI-PC) AUDIO AUDIO...
-
Page 25: Connecting To An Audio System
MAKING CONNECTIONS Connecting to an Audio System You can use an optional external audio system instead of the built-in speaker. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. -
Page 26: Connecting Headphones
MAKING CONNECTIONS Connecting Headphones You listen to the sound using headphones. NOTE AUDIO menu options are disabled when headphones are connected. When changing AV MODE with headphones connected, the change is applied to video but not to audio. Optical Digital Audio Out is not available when headphones are connected. Headphone impedance: 16 Ω... -
Page 27: Remote Control
REMOTE CONTROL rEMotE coNtroL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover. - Page 28 REMOTE CONTROL RATIO INPUT TV / INFO Views the information of the current program and screen. SMART Accesses the Smart Home menu. MY APPS Shows the list of Apps. Navigation buttons (up/down/left/right) LIST Q.VIEW Scrolls through menus or options. OK ꔉ Selects menus or options and confirms your input.
-
Page 29: Magic Remote Control Functions
MAGIC REMOTE CONTROL FUNCTIONS MaGIc rEMotE coNtroL fuNctIoNS When the message “Magic remote control battery is low. Change the battery.” is displayed, replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV. -
Page 30: Registering Magic Remote Control
MAGIC REMOTE CONTROL FUNCTIONS Registering Magic Remote Control Info. The Magic Remote Control operates by pairing with your TV.Once you purchased the TV, please register the Magic remote control as follows; How to register the Magic Remote Control To register automatically, turn the TV on and More press the Wheel (OK). -
Page 31: Using The User Guide
An index of key words present in the User Guide. Provides the detailed information on the functions of LG Smart TV when the Internet is connected. (It may not be available depending on the country/ language.) -
Page 32: Specifications
Operating Humidity Less than 80 % Environment condition Storage Temperature -20 °C - 60 °C Storage Humidity Less than 85 % 42LA6900 MODELS (42LA6900-CB) With stand 951 x 634 x 269 (mm) Dimensions (Width x Height x Depth) Without stand 951 x 564 x 56.2 (mm) - Page 33 SPECIFICATIONS 42LA7400 MODELS (42LA7400-CB) With stand 951 x 634 x 269 (mm) Dimensions (Width x Height x Depth) Without stand 951 x 564 x 56.2 (mm) With stand 14.3 Kg Weight Without stand 12.2 Kg Power requirement AC 100-240 V~ 50 / 60 Hz 47LA7400 MODELS (47LA7400-CB)
- Page 34 SPECIFICATIONS HDMI (DTV) supported mode HDMI (PC) supported mode Horizontal Vertical Horizontal Vertical Resolution Resolution Frequency Frequency Frequency (kHz) Frequency (Hz) (kHz) (Hz) 640 x 480 31.469 / 31.5 59.94 / 60 640 x 350 31.468 70.09 720 x 480 31.469 / 31.5 59.94 / 60 720 x 400...
- Page 35 SPECIFICATIONS 3D supported mode Video, which is input as below media contents is switched into the 3D screen automatically. The method for 3D digital broadcast may differ depending on the signal environment. If video is not switched automatically into 3D, manually convert the settings to view 3D images. 3D supported mode automatically Horizontal Frequency Vertical Frequency...
-
Page 36: External Control Device Setup
2D to 3D, Side by Side(Half), 1280 x 720p 30 / 60 Top & Bottom Miracast™ / WiDi 1920 x 1080p 30 / 60 Others 2D to 3D ExtErNaL coNtroL dEvIcE SEtuP To obtain the external control device setup information, please visit ‘www.lg.com’. -
Page 37: Maintenance
MAINTENANCE / TROUBLESHOOTING MaINtENaNcE Cleaning Your TV Clean your TV regularly to keep it at peak performance and to extend the product lifespan. CAUTION Make sure to turn the power off and disconnect the power cord and all other cables first. When the TV is left unattended or unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. - Page 38 The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. MODEL SERIAL...
- Page 39 OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
-
Page 40: Note
KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Q.Menu CH +, PR + R/C Button R/C Button CH -, PR - List, - (ATSC Only) R/C Button R/C Button Volume + List... -
Page 41: Image Shown May Differ From Your Tv
(TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals. - Page 42 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) RS-232C with RS-232C Cable (Legacy) RS-232C IN Phone jack Type (CONTROL & SERVICE) (PC) (TV) • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and RS-232C IN (CONTROL &...
- Page 43 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
- Page 44 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
- Page 45 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) 04. Volume Mute (Command: k e) ► To control Power Off of the set. ► To control volume mute on/off. You can also adjust mute using the MUTE button Transmission[k][a][ ][Set ID][ ][Data][Cr] on remote control.
- Page 46 EXTERNAL CONTROL DEVICE SETUP 09. Tint (Command: k j) 14. Color(Colour) Temperature (Command: x u) ► To adjust the screen tint. ► To adjust colour temperature. You can also adjust You can also adjust tint in the PICTURE menu. Color(Colour) Temperature in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Transmission [x][u][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64...
- Page 47 EXTERNAL CONTROL DEVICE SETUP * Digital Terrestrial/Cable/Satellite Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) [Data 00][Data 01]: Channel Data - 01 : Cable TV (CATV) Data 00 : High Channel data * Digital Terrestrial/Cable Data 01 : Low Channel data - 00 00 ~ 27 0F (Decimal: 0 ~ 9999) Data 00 : xx (Don't care) Data 02 : Input Source (Digital)
- Page 48 EXTERNAL CONTROL DEVICE SETUP [Data 01][Data 02]: Major Channel Number 20. Control Back Light (Command: m g) Data 01: High byte Channel Data • For LCD TV / LED TV Data 02: Low byte Channel Data ► To control the back light. - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) Transmission [m][g][ ][Set ID][ ][Data][Cr] [Data 03][Data 04]: Minor/Branch Channel Number...
- Page 49 11 11 EXTERNAL CONTROL DEVICE SETUP 22. 3D(Command: x t) (only 3D models) 07 : 3D Sound Zooming 08 : Normal Image View (Depending on model) 09 : 3D Mode (Genre) ► To change 3D mode for TV. Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] [Data 01] It has own range for each 3D option determined by [Data 00].