Toshiba RS4002Z-0 Instruction Manual page 4

Introduction
Thank you for purchasing the "RS485 Converter Option Unit(RS4002Z)" for TOSVERT series inverter.
Using this RS485 Option Unit, a communication between the inverter, which has the common serial
option (communication) connector, and a host computer is available.
Please read the entire manual carefully before attempting to control your inverter via RS485 serial
connection. Besides this instruction manual, the "Serial Communications Function Manual" is needed
to develop software which communicates with the inverter. In such a case, consult with our branch
office or sales office about it.
In addition, it has this manual kept to the operator using "RS485 Converter Unit", and please use it for
future maintenance and inspection
■ ■ ■ ■ Explanation of part number of RS485 Option Unit
ＲＳ４００２Ｚ −０
■ ■ ■ ■ Check of accessories
The RS485 Converter Unit is shipped together with the following items in the package. Contact your
sales agency if any of these is missing.
(1) RS485 Converter Unit ...... 1 unit (RS4002Z)
(2) Instruction manual of RS485 Option Unit......1 copy
(E6580938)
(3) Connector terminal (remover side)......1 pcs
(TMSTBP 2.5/6-ST-5.08 : Phoenix Contact)
Note
The RS485 Option Unit (Part Number : RS4002Z) is not provided with connection cable
between the inverter and Option Unit. This should be purchased separately.
Part number of connection cable
between the Inverter and Option Unit
Revision number
Cable length (Cable length between inverter and Option Unit)
Z: Without cable
Model number of RS485 Option Unit
Symbol of RS485
CAB0011
CAB0013
CAB0015
Cable length
1m (1.2m)
3m (3.6m)
5m (4.8m)
−3−
E6580938
M A
N U
A L