ABB OneFit Instruction Manual page 5

D I S T R I B U T I O N S O LU T I O N S
—
Scope of the instruction manual
The purpose of this manual is to provide
instructions for receiving, handling, operation,
storage and maintenance of the cable test and
temporary earthing truck for OneFit. This manual
shall be carefully read and used as a guide during
these operations.
The following procedure shows how to operate a
cable test truck within OneFit frame and to access
the truck terminals providing safety information.
This document gives the step by step operation
procedure suggested to safely use a cable test
truck and access potentially live parts. It is
mandatory to follow all the steps.
See relevant latest OneFit operation manual
OneFit: 1VCS005985 to complete the knowledge
of the product.
All information in this booklet was current at the
time of printing.
This procedure is based on the usage of a
dedicated cable test truck relevant "striped" door.
Instead, the short wording "door" is used for the
OneFit dead front cover element.
WARNING
The equipment may contain voltages at a level
which may cause death or serious injury.
This equipment should only be operated by
qualified personnel. Follow usage instructions
and safety precautions. Only use this
equipment for its nameplate rating.
5