Motorola Motostart H700 Manual

Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Take a moment before you get started to
H700
familiarize yourself with your new
Bluetooth®
H700 Headset.
Handsfree Headset
Get Connected in
4 Quick Steps
1 - CHARGE
Volume
2 - START
Buttons
BLUETOOTH
FEATURE
3 - PAIR
4 - TEST AND
USE
For help, contact us at 1- 877-MOTOBLU
or visit us at www.hellomoto.com
3
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
Step B - SET YOUR PHONE TO LOOK FOR
www.hellomoto.com
YOUR HEADSET
1-877-MOTOBLU
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for
1
hearing impaired)
1-800-461-4575 (Canada)
Guide Number: 6809495A68-O
2
3
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and
4
their accessories may be prohibited or restricted in certain areas.
5
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2005.
1
BEFORE YOU
BEGIN
1
Multi-Color Plug the Motorola charger into the end of
Indicator Light
Boom the headset.
Microphone The indicator light turns red when the
battery is charging. It may take up to 1
minute for the indicator light to turn on.
When the headset's battery is fully charged
(about 2 hours), the indicator light turns
green.
Call
Button
2
Disconnect the charger.
Speaker
(on reverse
Note: Headset is not functional while charging.
side)
PAIR
4
CONTINUED
Your Phone
Your phone and headset are now paired
and ready to make and receive calls.
To make a call:
For most Motorola phones:
1 Open the headset boom and place the
Menu >
On your Motorola phone, press M( ( )
headset over your ear.
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
2 On your phone, dial the number you want
to call and press the SEND key.
The phone lists Bluetooth devices it finds.
3 If your phone and headset are successfully
Select Motorola H700.
paired, you will hear ringing on the headset.
Select OK or Yes to pair your headset with
your phone.
After you have successfully paired your
Enter the passkey: 0000
phone and headset, you don't need to
Select OK. repeat these steps. For daily use, ensure
that your headset is turned ON and that
When your headset successfully pairs with
your phone's Bluetooth feature is ON.
your phone, the indicator light changes from
steadily lit to flashing blue.
To save battery power, turn OFF the
headset when you don't use it for an
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide. extended time.
2
CHARGE START BLUETOOTH
Your Headset's Battery
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
For most Motorola phones:
Menu
1 Press M( (
Bluetooth Link > Setup.
2 Scroll to
Power.
3
Select Change.
4 Scroll to On.
5 Press Select
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
TEST AND USE
USING YOUR H700
Functions Guide
on the reverse side
for information on
using your H700.
3
FEATURE
Your Phone
Before you can use your headset, you must pair
(link) it with your phone.
Step A - PUT THE HEADSET IN PAIRING
MODE
> Settings > Connection >
)
1 Ensure the headset is turned off (indicator
light not blinking and headset boom is closed).
2
Press and hold the Call E button. After about
4 or 5 seconds, the indicator light becomes
steadily lit in magenta.
3 Release the Call E button and immediately
open the headset boom. The indicator light
remains steadily lit in magenta.
to turn on the Bluetooth
If the indicator light is flashing in blue or not
steadily lit when opening the headset boom,
repeat steps 1 through 3 on this page.

TROUBLESHOOTING

My phone doesn't find my headset.
See
Make sure the indicator light on your headset is
Features and
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1- 877-MOTOBLU.
FOR DETAILS ABOUT YOUR HANDSFREE
DEVICE
See the user's guide or visit us at
www.hellomoto.com/bluetooth and click
Support.
PAIR
Your Headset