Browsing Phone Book; Storing Number Into The Phone Book - GE 22428 User Manual

1 - E N G L I S H
2 - P O R T U G U E S E
3 - S P A N I S H

Browsing phone book

See "Recalling a number from the phone book directory" for details.

Storing number into the phone book

There are two ways to store a number into the phone book directory.
The first way is to choose 'STORE' from the menu to create a new phone book entry.
After selection, users will be prompted to enter the name first.
N A ME :
After the first pressing, the entering display will appear and the letter will blink once for 1 second,
during this 1 second, the character (listed in the following table) can be entered by pressing a digit '1'
to '0' for different times within 1 seconds.
After one second of no key press or another digit key is pressed, the cursor will be advanced by one
step as shown, and blink to indicate the current entering position.
P _
Press [C] to delete the current digit or press [INT /OK] to complete the name entering procedure.
Name and number cannot be empty.
User may enter a name of up to 10 characters. During name entering, user may press [C] to clear the
last input character. Press [INT /OK] to confirm the name entered. If no character is entered but press
[INT /OK] to confirm, a warning tone will prompt.
After entering the name and confirm, number entry will prompt.
N U MB E R :
A user may enter a number of up to 16 digits. During number entry, the user may press [C] to clear
the last input digit.
1 2 3 _
Press [INT/OK] to complete the number entry and also the procedure of storing an entry in the phone
book. A confirm tone will be heard and the storing can be continued one by
The second way to store a number is to copy the call ID number from the call log. The detail of the
operation will be described in the section 'Caller ID operation'.
16
one.