Honeywell Intermec CV41 User Manual page 80

1. Tap Start > Programs > iSpyWiFi. The iSpyWiFi application launches.
2. Tap the Scan tab to view a list of available 802.11 networks. The list includes the
3. Tap the Supp tab to view radio supplicant information, including a list of supplicant
4. Tap the Ping tab to run a ping test to the host.
5. Tap the RSSI tab to view the received signal strength of the host signal.
6. Tap the Conf tab to set up a log file that lists RSSI history.
72
The iSpyWiFi tab shows:
•
MAC address and IP address of the 802.11 radio.
•
network association status, including the SSID and MAC address of the access
point.
•
security configuration.
•
radio transmit power and signal strength information.
signal strength, channel, and MAC address for each network.
•
Tap Scan to refresh the screen.
events and authentication status.
•
To verify the settings for the currently active security profile, tap Configure Profile.
Intermec Settings launches for you to configure 802.11 Radio settings.
•
To try reconnecting to the network, tap Reconnect.
•
To delete the events in the list, tap Clear Events.
a. In the Host field, enter the IP address of the host.
b. From the Repetitions list, choose the number of times the computer will ping the
host.
c. Tap Ping. The graph shows the amount of time it takes for the host to return the
ping. Tap List to see this information in a list format.
The information box includes the current signal strength, host SSID name, MAC
address, data rate, and transmit power.
•
Tap Mark to place an arrow marker above the graph.
This screen includes the 802.11 radio driver version and available radio modes.
a. Check the Log to File check box.
b. (Optional) Change the sample period and number of samples displayed.
c. Tap Log File. The Save As screen appears.
d. (Optional) Change the name of the saved log file, the folder to which the file will
be saved, the content type (log or text), and the location.
e. Tap OK.
CV41 Vehicle Mount Computer (Windows CE) User Guide