Specifications; Scanner Specifications; Ac Adapter Specifications - Canon imageFORMULA CR-L1 User Manual

Specifications

Scanner Specifications

Type Desktop sheet-through scanner
Document size Height: 50 to 108 mm (2.0" to 4.3")
Length: 95 to 2,000 mm (3.7" to 78.7")
Thickness: 0.08 to 0.20 mm (0.003" to 0.008")
Weight: 64 to 157 g/m
Document feeding Automatic
Scanning method Contact image sensor (CMOS)
Light source LED (CR-L1 UV: UV LED)
Scanning side Simplex/Duplex
Scanning mode Black-and-white, Fine Text Filtering, Error
diffusion, 16-Level gray, 256-Level gray, 24-bit
color, UV Scan
Scanning resolution 100 x 100 dpi, 120 x 120 dpi, 200 x 200 dpi, 300
(primary scan lines x x 300 dpi
secondary scan lines)
Scanning speed CR-L1: 45 cpm
(American checks) CR-L1 UV: 45 cpm (UV Scan mode)
Automatic feeder capacity Load limit of less than 5 mm (0.2") (within the
load limit mark)
Automatic document feed Up to 50 sheets
capacity (90 g/m
Make sure stacks do not exceed 5 mm in height
(including curling)
Interface Hi-Speed USB 2.0
Other functions Infrared double feed detection
Dimensions 140 mm (W) x 223 mm (D) x 188 mm (H) (5.5"
(W) x 8.8" (D) x 7.4" (H))
Weight Approximately 2.1 kg (4.6 lb)
Power requirement DC16V 0.8A (excluding AC adapter)
2
(17 to 40 lb bond)
2
(24 lb bond))
Power consumption
CR-L1 120V
220-240V
CR-L1 UV 120V
220-240V

AC Adapter Specifications

Model number MG1-5042
Input AC 100-240V 50/60Hz 0.57-0.32 A
Output DC16V 1.6A
Weight Approximately 0.2 kg (0.44 lb) (excluding
power cord)
■ Use the recommended operating environment for the ink cartridge
when using the imprinter.
■ You can use the functions noted above if your software supports them.
■ These functions may not work depending on your computer's
capabilities and the software you are using.
Specifications are subject to change without notice.
Noise
Operating environment
42
Scanning Sleep mode
15.8W or less 2.3W or less
15.8W or less 2.3W or less
Less than 64 dB
Temperature: 10°C to 32.5°C (50°F to 90.5°F)
Humidity: 20% to 80% RH (20% to 50% RH
when using the imprinter)
Power SW
OFF
0.1W
0.1W