Installation - Siemens DAC-NET Installation Instructions Manual

INSTALLATION

Figure 15
Installing the DAC-NET
A24205-A334-B839 (Edition 14)
P/N 315-035100-14
The DAC-NET plugs perpendicularly into one slot in the CC-5/CC-2 cardcage
via two 96-pin DIN connectors and can occupy any slot in the cardcage.
Insert the DAC-NET card into the card guides right side up (lettering on
the front panel is legible)
Slide the card in until the card edge connectors contact the receptacles
on the motherboard.
Verify that the DIN connectors of the card and the card-cage aligned
properly. The card can only plug in one direction to the card cage, if it
does not align, DO NOT FORCE the card.
Place thumbs on the front panel adjacent to the captive screws and
gently apply even pressure on the card until the connectors seat in the
receptacles on the motherboard.
Secure with the captive screws.
Power up the system and verify that the DAC-NET power LED turns ON.
15
s