3. Assembly Diagram
Step 7. Remove knockout and connect conduit.
Step 8. Connect power cable to terminal block.
Connect earth cable to heater panel.
5, 10kW Heater
POWER INPUT
1Ø 208/230V 60Hz
Step 9. Insert control box. Connect the three thermistors(CN_Pipe out, CN_Pipe in and CN_Room) , CN_EEV,
CN_Motor1 and Heater connector in control box.
Heater
connector
8 Electric Heater
Lock nut
Conduit
Conduit
mounting
plate
Knockout for upflow
L1
L2
EARTH
CN_Pipe out (Red)
Knockout for
horizontal-left
15, 20kW Heater
POWER INPUT 1
1Ø 208/230V 60Hz
POWER INPUT 2
1Ø 208/230V 60Hz
CN_Pipe in (white)
CN_Room (Yellow)
CN_EEV (White)
CN_EEV (White)
CN_Motor1 (white)
EARTH
L1
L3
L2
L4
EARTH