Advertisement
4.3.
Tyre fitting
4.3.1. Lubricate both tyre beads with an approved rubber lubricant.
3.3.2. Mount and lock the wheel to the stand as in 4.2.2. to 4.2.4.
3.3.3. Place the lower bead of the tyre over the wheel rim and insert the fitting head of the tyre bar (10) between the bead and the rim with
the bead on the ledge of the fitting head.
4.3.4. Lever the bar against the cap (9) and rotate the bead over the rim (fig. 4).
4.3.5. Fit a tube if appropriate and then seat the upper bead in the same manner.
fig. 1
5.
DECLARATION OF CONFORMITY
MANUAL TYRE CHANGER
Model No: TC960
98/37/EC Machinery Directive
93/68/EEC Marking Directive
fig. 3
Declaration of Conformity
in conformity with the following standards and directives.
The construction file for this product is held by the Manufacturer and may be inspected, by a national
authority, upon request to Jack Sealey Ltd.
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole distributor in the UK of Sealey Professional Tools.
fig. 2
We, the sole distributor in the UK, declare that the product listed here is
31st May 2002
fig. 4
Advertisement
