Table of Contents
Advertisement
Section 4 - Security
Configure WPA-Personal (Bridge Mode)
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the bridge (192.168.0.50).
Click on Setup and then click Wireless Settings on the left side.
Security Mode in the Wireless Security Mode section
WPA-Personal.
WPA Mode in the WPA section
WPA2 Only, or WPA Only. Use Auto if you have wireless clients
using both WPA and WPA2.
Group Key Update Interval
changed.
Pre-Shared Key section
both ends of the wireless connection. The passphrase must be between 8-63 characters.
7. Click Save Settings at the top of the window to save your settings. If you are configuring the access point with a wireless
the access point.
D-Link DAP-1560 User Manual
Auto (WPA or WPA2),
TKIP, AES, or TKIP and AES.
74
Advertisement
Table of Contents
