Page 1
Because DVD is a new technology, we recommend that you read this manual carefully before connecting your DVD Home Theater System and operating it for the first time. Keep the manual in a safe place for future reference. 1AD6P1P2006-- DWM-2600, Issue Number 1 DWM-2600 English...
Angle Replay ... E22 IMPORTANT INFORMATION: To connect this DVD Home Theater System to a TV, TV must have a Video input jack (RCA-type) at least. You cannot connect it to an antenna terminal of TV. To operate the built-in TVGuardian...
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by Sanyo may void the user's authority to operate this equipment. FOR SAFE AND EFFICIENT OPERATION •...
1. Loading slot 2. Eject button (q) 3. FL display 4. Remote sensor (IR) 5. Volume control (VOLUME) 6. Power button (z/ON) REMOTE CONTROL RB-TS780 CONTROLS 7. Headphone jack (PHONES) 8. Play button (a) 9. Stop button (n) 10. Preset tuning, Skip/Next/Previous buttons (f - PRESET + e) 11.
Page 6
REMOTE CONTROL RB-TS780 Inserting batteries Two "AA" batteries (not supplied) Note: Remove the batteries if the remote control is not to be used for a month or more. Batteries left in the unit may leak and cause damage. IMPORTANT NOTE: SPENT OR DISCHARGED BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY IN COMPLIANCE WITH ALL APPLICABLE LAWS.
Note: Do not connect the power cord to a 120VAC 60Hz outlet until all connections have been made. Speaker Connections To achieve proper stereo reproduction, connect the speaker wires without shorting to adjacent wires as shown below. Front right speaker Gray Twist and pull it off.
Speaker Placement Front right speaker Center speaker Front left speaker Subwoofer Place it near the front speaker. Surround left speaker The center speaker and front right/left speakers have build-in magnetic stray field compensation. They may be placed close to a TV without affecting the color purity. Place the front left/right speakers either side of the TV.
Conventional TV Connection Using VIDEO OUT jack Connect the Video cable with yellow connectors (supplied) between the VIDEO OUT jack of the unit and the VIDEO INPUT jack on the TV. Partial back panel To VIDEO OUT jack (Yellow) Notes: •...
Using RF Modulator If your TV does not have a Video input jack and has an antenna terminal only, please purchase the *RF Modulator (not supplied). (*Please consult your audio/video dealer.) Example: Unit, TV and RF Modulator connections Partial back panel To VIDEO OUT jack (Yellow) 1.
Progressive-scan TV Connection Your TV must be capable of handling progressive scanning and have component video input capability. To AC 120V, 60Hz AUDIO INPUT TV with progressive-scan capability 1. Connect to the component video input jacks. (The VIDEO OUT or S-VIDEO OUT jack connection is not necessary.) 2.
VIDEO (AUDIO) IN 2 jacks. Headphones jack (PHONES) Connect a pair of stereo headphones with miniplug (8 ohms - 32 ohms, not available from SANYO) to the PHONES jack for monitoring or for private listening. The speakers are automatically disconnected when headphones are connected.
Common Operation Turning the power on and off Press [z/ON] to turn the power on. • “HELLO” appears briefly on the FL display. (After connecting the power cord, when you press [z/ON] for the first time, the volume-reset feature automatically sets the initial volume level.) When the power cord is connected to the AC outlet, the unit will respond to commands from the remote control.
Selecting Surround Mode Press [SURROUND] to select the surround mode. Each time the button is pressed, the surround mode changes as follows: AUTO SURR v 5.1ch SURR v 2.1ch ST v AUTO SURR… Function FL display Description The unit selects the surround mode automatically depending on the disc. DVD/CD AUTO SURR •...
Adjusting the Speaker Volume Balance This unit is set to the standard level before shipping from the factory. You may not need any adjustment. However, depending on the size of the room and the placement of the speakers, you may benefit from a fine adjustment. In this case, follow the steps below.
The following types of discs can be played on this unit. Disc type and logo mark DVD-Video Audio CD Region Number Region number (Regional restriction code) is built-in to the unit and DVD video discs. Region number “1” or “ALL” of DVD video discs can be used on this unit.
Preparations • Turn on the TV and select the video input source. Refer to your TV’s owner manual. V I D E O • Select the playback picture size according to the aspect ratio of the TV. (See “Setting Display” in “INITIAL SETTINGS” on page E33.) 4:3 LB 4:3 PS...
Basic Playback When operation buttons are pressed, that operation is displayed on the TV screen. The display disappears after several seconds. 1. Press [z/ON] to turn the power on. 2. Press [FUNCTION] to select the “DVD/CD” function. 3. Push the disc (label facing up) gently into the loading slot until automatic loading begins, then release the disc.
Stopping Playback [DVD] • Press [n] once during playback. “Resume n” appears briefly on the TV screen. When you press [a], playback starts automatically from the point where you stopped. “a” appears briefly on the TV screen. Note: Some discs may not resume playback. •...
Selecting a DVD Menu Notes: • The operation may differ depending on the disc used. • Selecting a menu may not be possible on some discs. 1. Press [MENU]. The main menu screen will appear. Note: Press [MENU] again to resume playback. 2.
Title Search [DVD] 1. Press [SEARCH MODE] once during playback or in the stop mode. The title search screen appears on the TV screen. Example: Title Search -- /28 2. Press the number button(s) to enter the title number. Example: To select Title No.3, press [3].
Fast Playback Fast forward playback Press [c] repeatedly to select the fast speed forward playback. [DVD] c 1 v c 2 v c 3 v c 4 (4 steps) [CD] c 1 v c 2 (2 steps) Press [a] to return to normal playback. Fast reverse playback Press [d] repeatedly to select the fast speed reverse playback.
Picture Zoom (Pin Point Zoom) [DVD] 1. Press [ZOOM] while holding [SHIFT] down during normal/ slow playback or still picture. The pin point guide appears on the TV screen. The guide divides the screen into nine, and the number shows the point. Note: If you quit the screen, press [ZOOM] while holding [SHIFT] down.
Repeat Playback Press [REPEAT] during playback (or programmed or random playback) of the title (or track) you want to repeat. Each time the button is pressed, the repeat mode will be changed as follows. [DVD] TV screen Operation Chapter Repeat of the chapter being played Title Repeat of title being played Normal playback mode...
Random Playback [CD] 1. Press [PROGRAM/RANDOM] once in the stop mode. • “Random” appears on the TV screen. 2. Press [a] to begin random playback. The unit will automatically select tracks at random. Notes: • To stop random playback, press [n]. •...
Selecting Subtitle Language [DVD] This operation works only with discs on which multiple subtitle languages are recorded. 1. Press [S.T.ON/OFF] during playback. The subtitle language mark appears. (Example: If “ Off” appears, press the button again. 2. Press [S.T.CH] repeatedly until the desired subtitle language appears on the TV screen.
Selecting On-Screen Information Press [ON SCREEN] repeatedly to show the disc information (Title, Chapter, Title elapsed playing time, Language, etc.). Example for DVD: 1. Press [ON SCREEN] during playback. Chapter remaining playing time Title elapsed playing time 00:08:20 00:01:45 2. Press [ON SCREEN] again. Chapter remaining playing time Title elapsed playing time Chapter number...
TVGuardian Before Setting • Initial setting is “CC2” on this unit. • Please set “CC2” or “C2” (Closed caption on channel 2) on your TV first. For more details, please refer to your TV’s owner manual. • When “TVG Mode” is set, the subtitle language may not appear.
How It Works After Setting TVGuardian When a disc supporting closed caption is played, it mutes the entire phrase instead of just the swear word and displays the modified text, by design. It turns the sound back on when the phrase is completed.
Before Starting This unit can play back the CD that has recorded music data, MP3 files. • The file system is ISO9660 Level 1 and Level 2. • If the CD has both audio CD tracks and MP3 files, only audio CD tracks are played.
(Eject) (Stop) 4. Press [o], [a], [p] or [b] to move the highlighted box to the desired file. • To go on to the next or previous directory, press [o], [a], [p] or [b]. • To go back to the previous directory, press [RETURN]. •...
PICTURE DISC OPERATION Preparation 1. Press [z/ON] to turn the power on. 2. Press [FUNCTION] to select the “DVD/CD” function. KODAK Picture CD Playback With KODAK Picture CD, it’s easy to turn film into pictures you can email from your PC and view on this unit! Just bring your film in for processing, and check the box for KODAK Picture CD.
• If you start the slide show from the file list... 1) Press [o], [a], [p] or [b] to move the highlighted box to the desired file. 2) Press [ENTER] (or [a]) to start the slide show. The file list appears after the last picture has displayed. •...
Once the initial settings have been completed, the unit can always be operated under the same conditions. The settings will be retained in the memory until they are changed, even if the power is turned off. Notes: • In this instruction manual, the language in on-screen display is English.
Setting Audio The sound from speakers can reach the listening position at different times depending the speaker placements. You can allow for this difference by changing the delay time of the center and surround speakers. You also can change the Dynamic Range Control (DRC). 1.
Setting Parental Note: If you set “TVG Mode”, “TVG CC” or “TVG CC Ch”, set them first before steps 6 and 7. See “Setting TVGuardian®” on page E27. 1. Press [SETUP] in the stop mode. The setup screen appears. 2. Press [a] to select “Parental”. 3.
Language Code List Enter the appropriate code number for the initial settings “Audio”, “Subtitle” and “DVD Menu” on page E33. Code Abbreviation Language of the language 6565 Afar 6566 Abkhazian 6570 Afrikaans 6577 Amharic 6582 Arabic 6583 Assamese 6589 Aymara 6590 Azerbaijani 6665...
ENJOYING VIDEO SOURCES 1. Press [FUNCTION] to select “VIDEO 1” or “VIDEO 2”. 2. Follow the instructions supplied with TV or other compatible/ video component. LISTENING TO THE RADIO To turn the unit on and listen to the last received station, press [TUNE/BAND] on the remote control.
Manual presetting 1. Tune in the station to be preset as described in “Automatic/ Manual Tuning”. 2. Press [PROGRAM/RANDOM]. “P - -” blinks. 3. While “P - -” is blinking, press [PRESET +] or [- PRESET] to select the channel to be preset. •...
SLEEP TIMER OPERATION The sleep timer automatically switches off the power after a preset time has elapsed. The volume will gradually be reduced (fade-out) during the 1 minute period before the unit turns off. There are 4 time periods available: 30, 60, 90, and 120 minutes. Press [SLEEP] repeatedly while holding [SHIFT] down to select the desired sleep time.
Page 41
Should this product require service, refer to the SANYO AUDIO/VIDEO limited warranty. If you do not have a convenient SANYO service station nearby, contact the SANYO dealer where you purchased the unit. Be sure to give the model number and explain the problem. The dealer will advise you how to obtain service.
More than 105 dB Wow and flutter: Below measurable level IMPORTANT INFORMATION Because its products are subject to continuous improvement, Sanyo reserves the right to modify product designs and specifications without notice and without incurring any obligation. SPECIFICATIONS Tuner Section...
Acts of God, or normal wear and tear. The foregoing is in lieu of all other express warranties and SANYO does not assume or authorize any party to assume for it any other obligation or liability.
Page 44
SANYO Electric Co., Ltd. Printed in China -E43-...