Operations of the edit item tree
The edit item tree shows overall project settings in a tree.
(1)
(2)
(3)
(4)
(1) Project root
(2) Setting category
(3) Item
(4) Setting group
■Selecting items
1.
The items are displayed by double-clicking the project root or each setting category.
2.
The editing screen of the selected item is displayed on the detailed setting editing screen by selecting the displayed item.
■Adding items
1.
The item is added by selecting the item to be added or the setting category, and performing any of the following
operations.
• Click Add Item ( )
• Select [Edit] [Add Item]
2.
When the item is added successfully, the added item is selected automatically and the screen is switched to the editing
screen of the added item.
Refer to the description of each item since the number of items which can be added is limited depending on
the setting type.
■Deleting items
1.
The item is deleted by selecting the item to be deleted and performing any of the following operations.
• Click Delete Item ( )
• Select [Edit] [Delete Item]
• The item cannot be deleted if the selected item is being used in other item.
Check where the item is being used and stop using it in other item according to the displayed error dialog
box before deleting.
• The first item (default name: ControlCPU) on the list in the "Target Device Settings" cannot be deleted.
4.2 Starting an MES Interface Module and an Configuration Personal Computer
4 PROCEDURE BEFORE OPERATION
4
53