Table of Contents
Advertisement
Chapter 5 Network Capture
[2] Control by the web browser
* PC provides the Network Capture.
PC1
PC3
Select input mode to "Network" previously.
1
Access to the control page of the monitor by using the
web browser. From the Network menu, click Capture
tab to display the setting page ( p.37).
2
Select the computer number from the pull-down
menu button of "Connecting PC" and click start but-
ton. The screen image of the selected computer will
appear on the monitor display in real time.
• To stop capturing, click stop button. The captured
image of the computer on the monitor is frozen.
• To restart capturing, click restart button.
3
To end capturing, click end button.
The IP address of the connecting PC should be registered previously (
If the error message appears, check item "Parameter set up" (
You can use the capture function by using the web browser or the monitor if the Network
Capture 3 software is installed into the computer correctly and its icon stays on the task bar.
70
MONITOR 2
PC2
Capture
PC4
PC5
MONITOR 1
PC6
Project a screen
image of PC1 with
PC2.
p.67).
* Start capturing of
the PC1 from the
PC5.
Set "On" when
using the wireless
mouse function
p.68).
Advertisement
Table of Contents
