DeWalt DW08801 Instruction Manual
  1. Manuals
  2. Brands
  3. DeWalt Manuals
  4. Laser Level
  5. DW08801
  6. Instruction manual

DeWalt DW08801 Instruction Manual

Self-leveling cross line laser
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Questions? See us 0n the World Wide Web at
Perguntas? Visite-nos na World Wide Web em
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
MANUAL DE INSTRUÇÕES
DW08801
Self-Leveling Cross Line Laser
www.dewalt.com
www.dewalt.com
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

Advertisement

Table of Contents
loading

Related Manuals for DeWalt DW08801

Summary of Contents for DeWalt DW08801

  • Page 1 Perguntas? Visite-nos na World Wide Web em INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. INSTRUCTION MANUAL ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. GUIDE D’UTILISATION MANUAL DE INSTRUCCIONES MANUAL DE INSTRUÇÕES DW08801 Self-Leveling Cross Line Laser...
  • Page 2 ENGLISH (original instructions) FRANÇAIS (traduction de la notice d’instructions originale) ESPAÑOL (traducido de las instrucciones originales) PORTUGUÊS (traduzido das instruções originais)
  • Page 3 FIG. 1 FIG. 3 FIG. 2 FIG. 5 FIG. 4 FLASHING CLIGNOTANT DESTELLA >4° AVERAGE 1. Power Switch EN MOYENNE PROMEDIO 2. Laser Aperture MÉDIA 3. Battery Compartment 4. Label Information...
  • Page 4 ENGLISH Step 4 / Étape 4/ Paso 4 FIG. 6 Step 3 / Étape 3 / Paso 3 Step 2 / Étape 2 / Paso 2 45˚ 90˚ Step 3 / Étape 3 / Paso 3 Step 2 / Étape 2 / Paso 2 Step 1 / Étape 1 / Paso 1 FIG.7 Step 1, 2 / Étape 1, 2 / Paso 1, 2 / Passo 1, 2...

  • Page 5: Warning Labels

    PRODUCT OVERVIEW The DW08801 laser level is a self-leveling laser tool that can be used for horizontal (level) and vertical (plumb) alignment and square alignment. This tool comes fully assembled and has been designed with features that allow for quick and easy set-up. Please read and understand all instructions within this instruction manual in addition the Safety Manual prior to use.

  • Page 6: Batteries And Power

    Out of Level Indicator The DW08801 is equipped with an out of level indicator. When the tilt range (> 4° tilt) has been exceeded the laser beam will flash. The flashing beam indicates that the tool IS NOT LEVEL (OR PLUMB) AND SHOULD NOT BE USED FOR DETERMINING OR MARKING LEVEL (OR PLUMB). Try repositioning the laser on a more level surface.

  • Page 7: Field Calibration Check

    Field Calibration Check CHECKING ACCURACY – HORIZONTAL BEAM, SCAN DIRECTION (FIG. 6) Checking the horizontal scan calibration of the laser requires two walls 30’ (9m) apart. It is important to conduct a calibration check using a distance no shorter than the distance of the applications for which the tool will be used.
  • Page 8 WALT Industrial Tool Co., 701 East Joppa Road, Towson, MD 21286 • (Apr. 14) Form No. N296281 Copyright © 2014 D WALT...

Table of Contents