Sanyo PDG-DHT100L Owner's Manual page 53

Advanced
color matching . . . . . Set to 'On' to activate the 'Advanced color
matching'. When it is set to 'Off', all items
except for 'Test pattern' are displayed in
grayout and cannot be adjusted.
Measured . . . . . . . . When using the color wheel set optimized
for high brightness, the chromatic
coordinate (X,Y) and the brightness (L) of
Red, Green, Blue, Half white, and White
are displayed. When using the color wheel
set optimized for rich color reproduction,
the chromatic coordinate (X,Y) and the
brightness (L) of Red, Green, Blue, and
White are displayed.
Target . . . . . . . . . . . Adjust the chromatic coordinate (X,Y) and
the gain value (g) of Red, Green, Blue,
Cyan, Magenta, Yellow, and White. Use
the Point ed7 8 buttons to move the
red frame pointer to an item of which you
want to adjust the value and then press
the SELECT button. Use the Point ed
buttons to adjust the value. To move to
the next digit, use the Point 7 8 buttons.
Press the SELECT button to set the value.
Auto test pattern . . . Select 'On' to display a suitable pattern
when setting items.
Reset . . . . . . . . . . . . Select 'Reset' and press the SELECT
button. Then the confirmation message
appears. Press the SELECT button at [Yes]
to reset to the previously stored values.
Store . . . . . . . . . . . . Select 'Store' and press the SELECT
button. Then the Confirmation box
appears. To store adjusted data, select
[Yes].
Test pattern . . . . . . . When using the color wheel set optimized
for high brightness, use the Point ed
buttons to select from (Measured) Red/
Green/Blue/Half white/White/(Target) Red/
Green/Blue/ Cyan/Magenta/Yellow/White.
When using the color wheel set optimized
for rich color reproduction, use the Point
ed buttons to select from (Measured)
Red/Green/Blue/White/(Target) Red/
Green/Blue/Cyan/Magenta/Yellow/White.
Quit . . . . . . . . . . . . .Exit the Color matching menu.
DynamicBlack
DynamicBlack TM improves the black level of the projector. Black
level is the darkest part of a picture and varies between viewing
devices and environments. Set DynamicBlack Off/Low/High.
Advanced color matching
Setting
Close this dialog box.
5