Computer Input
Input Source Selection (Computer 1: RGB )
Direct Operation
Choose Computer 1(RGB) by pressing the INPUT button on the top control or press the COMPUTER 1 button
on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
Top Control
INPUT button
COMPUTER can not be selected when using the COMPUTER IN 2/
MONITOR OUT terminal as MONITOR OUT output.
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point
then press the Point
Use the Point
▲▼
When Computer 1 is selected, press the Point
3
button to access the submenu items. Use the Point
buttons to select the RGB input source and then
▼
press the SELECT button.
Note:
When the Input Search function is set to On1 or On in
the Auto setup function, the input signal will be searched
automatically (p.45).
Computer 1
Computer
HDMI
Video
S-video
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Computer 1.
Remote Control
Input Menu
►
▲
Computer
1
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
7