Flow Of Installation Mode - Sanyo POA-HDTM01 Owner's Manual

Flow of Installation Mode

TRANSMITTER
When using a pair of transmitter and receiver for the first time.
Select "Single Mode" in
Step 1:
"Mode Select"..
Step 2: Execute "Authentication".
Step 3: "Please wait ..." >>> "Success"
When changing a pair of transmitter and receiver,
Execute "Initialize" to reset
Step 1:
the authentication.
Step 2: Execute "Authentication".
Step 3: "Please wait ...">>> "Success"
When using a transmitter and receivers in broadcast mode.
Select "Broadcast Mode" in
Step 1:
"Mode Select"..
Step 2: Check the "ID Number".
Step 5: Adjust "Output Level".
Single Mode Operation
Broadcast Mode Operation
Basic Setting and Operation
PROJECTOR
Select "Single mode" in
Step 1:
"Mode select".
Select "Execute" in
Step 2:
"Authentication".
"Please wait ..." >>> Su ccess
Step 3:
Select "Reset" in
Step 1:
"Authentication".
Select "Execute" in
Step 2:
"Authentication".
"Please wait ..." >>> Su ccess
Step 3:
Select "Broadcast mode" in
Step 1:
"Mode select".
Input the same ID Number
Step 3: of the transmitter into "Input
ID".
Step 4: Check "Reception Level".
HD DATA WIRELESS TRANSMITTER BOX
OWNER'S MANUAL
icon
icon
1