Table of Contents
Advertisement
SDB Menu Operation
General Menu Operation
Use the CURSOR keys to navigate through the menu Categories, Features, and Options. The
sor keys move the highlight to the left or right. The
(The Up and Down keys move the highlight in a continuous loop.)
There are three on-screen menu categories: Picture, Channel, and Setup.
Selecting a Category and Feature Option
1. Press the MENU key for on-screen display.
2. Use the
/
keys to select a category.
3. Use the
/
keys to view features and options.
As each feature is highlighted, available options will
appear and a checkmark " " will indicate the current setting.
4. Use the
/
keys to highlight the desired feature.
5. Press the
key.
6. Use the
/
keys to highlight the desired
option.
7. Press ENTER to set or choose the highlighted option.
8. Press MENU to exit.
OR
9. Use the
/
keys to move to the category
tab area and the
/
Operational Tips:
– The Cursor keys are multi-functional keys.
– During numeric entries, the
entered (0~9). This allows numbers to be corrected or changed
during channel selection or Clock/Day manual settings.
/
keys to select another category.
key will "undo" any number
cursor keys move the highlight up and down.
Figure 17—Category (tab
highlighted in yellow)
with Feature listed
Figure 18—Option selected
QuickTips
/
cur-
The menu will
I
disappear from
the screen after
approximately 30
seconds, if no keys
are pressed. Press
MENU key again
to redisplay.
The last adjusted
I
feature is selected
when returning to
the menu on-screen
display.
Press the remote
I
control RESET key to
clear all customized
settings and return to
factory default settings.
(SDB starts searching
for available
channels.)
Need help?
Visit our Web site at
www.sanyoctv.com
11
Advertisement
Table of Contents
