Epson MOVERIO BT-200 User Manual page 11

01_Chapter title
01_Head A Charging
The product is not fully charged at the time of purchase. Charge before use.
02__lead
This section explains how to charge using the AC adapter. Initial charging takes approximately 5 hours.
A Connect the headset and the controller.
Insert the headset's connection cable into the controller's headset connection port until it clicks.
B Connect the controller and AC adapter.
Connect the controller and the AC adapter with the USB cable.
Plug in the AC adapter.
C
The LED indicator ashes green.
Charging is complete when the LED indicator stops ashing and changes to lit green. Disconnect the AC adapter and the USB
cable.
Battery life is approximately six hours. Battery life may vary depending on application and environmental usage conditions.
Getting Ready
11 11