Procedure; Figure 9 A-020W-A Connections - Nokia 7368 ISAM CPE Product Manual

7368 ISAM CPE A-020W-A Product Guide

7.6 Procedure

Use this procedure to replace a A-020W-A CPE.
1
Figure 9
2
3
4
5
Issue: 01
Release 05.08.01 | June 2018 | Edition 01
Power down the unit by using the on/off power switch. See Figure
the A-020W-A CPE.
A-020W-A connections
Disconnect the WAN, Ethernet, and power cables from the A-020W-A CPE; see Figure
the connector locations on the A-020W-A.
Replace the A-020W-A CPE with the new A-020W-A. The device can be placed on any flat
surface, such as a desk or shelf.
Connect the Ethernet cables directly to the RJ-45 ports; see Figure
RJ-45 ports.
Connect the WAN cable directly to the RJ-45 port; see Figure
WAN port.
3FE-47511-AAAA-TCZZA
9
LAN 1
LAN 2
WAN
ON/OFF
9 for the location of the RJ-45
Replace a A-020W-A
for the connections on
28230
9 for
9 for the location of the
39