Siemens Mobile 750 Operating Manual page 51

Advanced menu - Advanced system settings
Mode - Infrared Interface Mode
This field sets the mode for the infrared interface.
Standard IrDA is set.
IrDA
A data transfer rate of 38,4 kbit/s is set.
Ask-IR
Fast IrDA is set.
FIR
Parallel port
This field selects the address and the interrupt used to access the relevant parallel port.
The parallel port can be set to a certain address and interrupt in the Base I/O Address
Enabled
field.
The parallel port is automatically set to the next available combination (address,
Auto
interrupt).
The parallel port is disabled.
Disabled
Base I/O Address - Address of the parallel port
i
This field is only visible when the Parallel Port field is set to enabled.
This field selects the address and the interrupt used to access the relevant parallel interface.
378h IRQ7, 278h IRQ5, 3BCh IRQ7, 378h IRQ5
The parallel port is set to the shown address and interrupt.
Mode - parallel data transmission mode
This field is used to specify whether the parallel interface is to be used as a bi-directional input/output
port or just as an output port. ECP and EPP transfer modes allow faster transfer rates of 2 and
2.4 Mbytes/s. These modes will only work with peripheral devices which support them. In addition, the
field Parallel must be set to 378h or 278h.
Bi-Directional
Data can be transferred in both directions across the port.
Fast transfer mode (up to 2 Mbytes/s), can output and receive data. The mode requires
EPP
a peripheral device which supports the EPP (Enhanced Parallel Port) transfer mode.
Fast transfer mode (up to 2.4 Mbytes/s), can output and receive data. The mode
ECP
requires a peripheral device which supports the ECP (Enhanced Capability Port)
transfer mode.
Output Only Bi-Directional
The port functions as an output port only.
Diskette Controller
This field is used to enable and disable the built-in floppy disk controller on the system board.
The floppy disk controller is enabled - IRQ 6 is used.
Enabled
The floppy disk controller is disabled - IRQ 6 is free.
Disabled
A26391-K84-Z100-1-7619
BIOS Setup
51