i
i
OPERATION
STOPPING
YOUR
ENGINE
•
Move engine switch to the =STOP" position.
•
If engine does not stop, move the choke lever upward
(Full Choke).
SHOULDER
HARNESS
(Fig. 16 )
_
WARNING:
WHEN WORKING WITH A BRUsHWACKER
IT SHOULD ALWAYS BE HOOKED TO A
SHOULDER HARNESS. IF NOT, YOU CAN-
NOT
CONTROL
THE
BRUSHWACKER
SAFELY WHICH CAN CAUSE INJURY TO
YOURSELF
OR OTHERS.
•
Place harness on the shoulders with the latch on the
i
BLADE TRANSPORT/STORAGE
COVER
(Fig. 17 )
•
Turn off the engine before installingthe blade transport/
storage cover over the blades.
•
AttachthebladetransporVstoragecoverovertheblade,
which may be or_or off of the unit.
Brush Tri-Blade
Saw Blade
chest, the Danger Sign on,theback;,andthe_ook.on:the;_:
dght thigh..The
h0ok::ShOul_
above your knee, or 6"(15cm)
•
Figure 17
Attach hook through one ofthe;susperJsion.holes.on.the
..,;i_._,_---
.. __.
.. ........
;
outer housing and adjust:the sbaulde_ hamessfor bal- •
•HANDLEBAR
ADau_
I MJ-Nt
(t-tgure ]u )
ance so the blade or dual lihe head is level with the
ground.
Tension the side belts so that the weightis evenly distdl_
uted across your shoulders.
A pmpedy adjusted
shoulder strap will support the entire weight of the unit,
freeing your arms and hands to guide and control the
cutting motion.
•
Turn the engine off before adjusting handlebar.
•
Put on shoulder harness and hook on the unit.
•
Adjust the handlebar by slightly unthreading the thumb
screw and rotatingthe handlebar forward or backward.
Ensure the mounting brackets remains beWeen the ar-
rows on the handlebar.
Tighten the thumb screw before starting the engine,
Mounting Brackets -..-.-_
Figure 18
Hook
Suspension
Hole
Figure 16
THROTTLE TRIGGER & LOCKOUT
(Fig. 19 )
•
The throttle tdggercontrols engine speed. At idle, a cen-
trifugal clutch automatically disengages the blade/dual
line head from the engine. The blade/dual line head will
coast to a stop.
•
The throttle lockout must be depressed before the
throttle tdgger can be depressed. Also, the throttle lock-
out prevents unintentional activation of the throttle trig-
ger.
Throttle Lockout
\
Throttle Trigger
Figure 19
- 12-