Connecting Cables To The Keyboard; Connecting Cables To The System Unit - Siemens KBPC M Operating Manual

Connecting cables to the keyboard

Plug the 15-pin connector of the keyboard cable into socket (1) of the keyboard and secure it
using the knurled screw.


Plug the connector of a PS/2 mouse into the mouse port (2) of the keyboard.


If required, attach the connector of the telephone handset cable or headset cable to port (5) of
the keyboard using an adapter (depending on whether you want to use a handset or a
headset).


If required, connect an external microphone to the microphone port (3) of the keyboard.


If required, connect stereo headphones to the headphone socket of the keyboard (4).
In place of an external microphone or stereo headphones you can also use the headset
i
without adapter that is provided if you connect it to the appropriate port (3 or 4).
If you connect an external microphone or stereo headphones, the corresponding
integrated devices (microphone, loudspeakers) are disabled.


Route all cables that you have connected to the keyboard in the guide channels provided on
the underside of the keyboard.

Connecting cables to the system unit

Be sure that the system unit is switched off.


Plug the connector with the keyboard symbol into the keyboard socket of the system unit.


Plug the connector labeled "MOUSE" into the mouse port of the system unit.


Plug the connector labeled "SPEAKER" into the loudspeaker socket of the system unit (audio
board).
If the loudspeaker output of your modem is not routed via the audio board, you can plug
i
the connector labeled "SPEAKER" into the modem board. In this case, the loudspeakers
are not stereo.


Plug the connector labeled "MIC" into the microphone port of the system unit (modem board).
A26381-K276-Z100-3-5E19
Keyboard KBPC M
English - 5