Location Instructions; Electrical Hook-Up; Operate - Kenmore QUIET COMFORT 758.14451 Owner's Manual

Location Instructions
WARNING: For your own safety, do
not use humidifier if any parts are
damaged ormiss!n .
Step 1
Place humidifier on a flat level surface in
area of house where most humidity is
needed, or one which would likely result in
moist air being circulated throughout the
house such as near a cold air return.
Placing the unit level is very important if
the humidifier is located on carpeting.
Moist air (humidity) produced wiil disperse
into the whole house, but area closest to
unit will have the highest humidity. If the
unit is positioned close to a window, con-
densation may form on _he window pane,
If this is not appropriate the unit should be
repositioned in another location.
NOTE: Due to release of coot, moist air
from humidifier, it is best to direct air away
from home thermostat and hot air regis-
ters. tt is best to position humidifier next to
an inside wall. Hot air registers and cold
air from outside wails can affect the effi-
ciencies of the controls. Unit should not
be placed where warm air from a hot air
register blows directly on unit.
i iiii i ii iii
Step 2
The humidifier should be positioned with
the back (cord exit side), at teast 2 inches
away from the wall. Air needs to enter
through louvers in the rear panel in order
for the humidifier to operate at peak effi-
ciency.
At Least
2" From Wall
• J,...:..:: "-,. i _
Electrical Hook-Up
Locate nearest _20V A.C. wall socket in
the location desired, preferably on inside
wall. Plug in the electrical cord.
WARNING: To reduce the risk of fire
or shock hazard, humidifier should
be plugged into a 120V A.C. outlet.
Do not use extension cords.