Attaching And Removing The Comb Attachment; Using The Trimmer - Panasonic ER206 Operating Instructions Manual

AC operation
If you connect the AC adaptor to the trimmer in the same way as
for charging, and turn on the power, you can use it.
• If the remaining battery is too low, the blades may move slowly
or stop, even with the AC operation. In this case, charge the
battery for 3 minutes or more.
• The battery will be discharged, even with the AC operation.
Attaching and removing the comb
attachment
Attaching the comb attachment
Mount the comb attachment to the main body
until "1" appears in the trimming length indicator.
Removing the comb attachment
Hold the main body securely and remove the
comb attachment from the main body.

Using the trimmer

• Make sure that the trimmer is turned off.
• Be careful not to cut your hand with the blade when attaching or
removing the comb attachment.
• The appliance may not operate in an ambient temperature
approximately 0 °C or lower.
1
Mount the comb attachment.
• It can also be used without the comb
attachment. (Trimming height: approx. 0.5 mm)
2
Turn the dial and ad ust the
trimming length indication
mark to the desired length.
• For more length settings, please refer
the table.
Indicator 1
Trimming Length (mm)
2
(estimate)
Indicator 7
Trimming Length (mm)
10.5
(estimate)
0·charge
3
2 3 4 5 6
3 4.5 6 7.5 9
8 9 10 11 12
12 13.5 15 16.5 18
9