Table of Contents
Advertisement
Appendix 2
Verification of MFA logs
36
After performing a case, Verify the MFA logs with the following steps.
1.
Using putty, login to the MFA and enter the below command:
tail -f /root/PredixMachine/logs/machine.log
2.
If any error messages are displayed similar to the above
screenshot, then there is a connectivity issue between the MFA
to the Cloud network. Verify the following steps:
•
LAN Port 1 of the Mini Field Agent is connected to the
facility network switch, using an ethernet cable. See
"Preparing Mini Field Agent for Boot Up".
•
See "Configure Router ACL Settings".
•
See steps from "Configuring Facility IP Address" to
"Rebooting Mini Field Agent".
•
See "Starting the Anesthesia Machine".
3.
Repeat step 1 and ensure that there are no error messages as
shown in the below screenshot:
2094532-001 D 02 2018
Advertisement
Table of Contents
