Advertisement
6 . TROUBLESHOOTING
THE PROBLEM
THE CAUSE
Paint Runs.
Too much paint applied
Air brush too close to object
Moving air brush too slowly along workpiece Move at a faster speed.
Grainy Spray.
Paint too thick.
Dried deposits on tip, needle or regulator.
Paint Splattering.
Needle snapping back into tip.
Paint too thick
Curved Stroke.
Air brush arcing too close to object.
Paint Spitting.
Needle snapping back into tip.
Paint too thick.
Restricted Spray.
Air adjusting valve out too far.
Paint tube in pot clogged.
Bubbles in Paint Cup. Air adjusting valve out too far.
Paint tube in pot clogged.
Erratic Spray.
Fluid needle bent or paint deposits on needle. Replace needle or clean as required.
Fig. 4
Nozzle seat
02
(internal)
05
Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a recycle centre
and disposed of in a manner which is compatible with the environment.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions, call us on 01284 757525 and leave your full name and address
including your postcode.
© Jack Sealey Limited
01
04
07
03
06 "wrench" not shown
Environmental Protection.
Sole UK Distributor, Sealey Group,
Kempston Way,
Suffolk Business Park,
Bury St. Edmunds, Suffolk, IP32 7AR
Original Language Version
THE SOLUTION
Press trigger lightly
Hold further away from object.
Thin paint.
Clean air brush thoroughly.
Release needle gently.
Thin paint.
Keep air brush parallel to the object,
unless curved stroke is desired.
Release needle gently.
Thin paint.
Loosen the air adjusting valve to obtain the
correct spray.
Clean as described above.
Adjust air valve to eliminate bubbles.
Clean as described above.
Item Part number
01
AB931.V2-01
02
AB931.V2-02
03
AB931.V2-03
04
AB931.V2-04
05
AB931.V2-05
06
AB931.V2-06
07
AB931.V2-07
01284 757500
01284 703534
Description
Gun module complete
Air regulator valve
Gravity cup
Fluid adjustment screw
Hose assembly
Wrench (not shown)
Adaptor, air hose
www.sealey.co.uk
Web
sales@sealey.co.uk
email
AB931.V2 Issue: 1 10/01/14
Advertisement
