Fujitsu SMARTCASE S500 Assembly Instructions Manual page 5

Assembly Instructions SMARTCASE S500
Next, mount the cooler on top of the CPU (1) and tighten the screws in the designated holes (2). Recommended
mounting screw torque: max. 0.8Nm. Be aware that the wire needs to be able to reach the red slot.
Option 1: Active Cooler
1
Put the cooler on top of the CPU and screw it onto the back plate through the board. Connect the cooler with the
board by the use of the cable connector (see arrow in Step 2).
Option 2: Passive Cooler
1
Then put the cooler on top of the CPU and screw it onto the back plate through the board. The thermal paste is
already applied.
__________________________________________________________________________________________________________________________________________________________
Page 5 of 23
2
2
www.fujitsu.com