Motorola MBP87SN User Manual page 5

ON/OFF Button
WIFI (Pair Key)
Child Lock
Fan Speed Button
Night Light
UV C Light
HEPA Filter Replace /
Reset Button
Table of contents
Tap to turn the unit ON or OFF.
When the unit is turned on, it will work at HI-speed mode
(default), with the SPEED button white backlight and
HI-SPEED white LED illuminating.
Long press this button for 3s when the machine starts up or
when in standby, the WIFI button white backlight illuminates
as "0.5s on/0.5s off", the machine goes into Wi-Fi pairing
status.
Press this button for 5s, CHILD LOCK BUTTON white
backlight illuminates, other buttons can't be operate in this
mode except the Child Lock Button itself.
Tap to cycle through the speed options (1, 2, 3 or AUTO).
The selected speed (1, 2, 3) is showed as White backlight,
with AUTO showed as Green backlight but also with a white
backlight for speed #1, or 2, or 3 per the environment
status.
• Fully bright light: Press the button once
• Half bright light: Press the button twice
• To turn off the night light: Press the button again.
• ON / OFF: Tap to turn the UV light button.
• The white backlight LED will flicker when it's time to
replace the bulb. Turn off and unplug the unit.
Replace the bulb according to directions, then press
and hold UV Light button for 5s to reset the system.
• The replace HEPA Filter white LED backlight will
flicker indicating that it's time to replace the HEPA
Filter. Turn off and unplug the unit. Replace the filter
according to instructions, then press and hold the
button for 5s to reset the system.