Beko 24" Operating Instructions Manual page 13

Sound mode
Y ou can select NORMAL, SPATIAL or
DOLBY VIRTUAL (optional)using the
Volume up/down buttons or mix button.
SPATIAL sound is an 'expanded stereo'. It
gives the impression that the two speakers in
the TV are further apart than they really are.
DOLBY VIRTUAL is based on Dolby Pro
Logic decoding for production of the Left,
Right, Centre and Virtual Surround Sound
channels using two loudspeaker.
Manufactured under license from Dolby
Laboratories. "Dolby", "Pro Logic" and
the double-D symbol are trademarks of
Dolby Laboratories.
12
Please Note
To get the surround effects in Dolby Virtual
mode, you must apply a Dolby Surround
encoded input to the TV.
You can't adjust the AVL and EQUALIZER
in DOLBY VIRTUAL mode.
To save your settings, select STORE
OK/Z
and press theOK/Z button. STORED
will be displayed. Press the Menu
button to go back to the previous
menu.
AVL
TV transmitters have different sound levels.
A VL (automatic volume limiting) maintains
the same sound level as you switch from
program to program.
To supply this press Volume up or down
button and select ON for AVL.
OK/Z To save your settings, select STORE
and press theOK/Z button. STORED
will be displayed. Press the Menu
button to go back to the previous
menu.
Dynamic Bass (optional)
Set DYNAMIC BASS to ON if you
wish to deepen the bass sound specifically.
Subwoofer (optional)
A sub woofer speaker can be fitted
within the TV case as an option
depending to the model.
For 33"(84cm) TV sets there
is an external subwoofer (optional)
to be fixed as shown below.
R
AUDIO OUT
L
AV3
AV1
AV2
Select Sound menu and press
Program down button to access
subwoofer.
Press the Volume up button to
switch the Subwoofer on or off.
Please Note
If you move the loudspeaker switch, on the
rear of the TV , to the external position, the
internal speakers in the TV will be switched
off but the Subwoofer will remain on if
switched on.