Sony XS-XB1621C Instructions

2 Way Component
Speaker System
©2016 Sony Corporation Printed in Vietnam
XS-XB1621C
Dimensions
Tweeter
ø 44





Reference Point Reference Plane
54.6
* Depending on the attachment location, the dimension value may differ.
4-692-688-11(1)
Woofer
Instructions
GB

Reference Point
Passive crossover network
Unit: mm

Reference Axis
34.9

4 - ø 4.5
P.C.D. ø 157

45º 45º

92.5 92.5
ø 85
 
Reference Plane Reference Axis
47.8 25.1
Mounting
Precautions
 Do not continuously use the speaker system
beyond the peak power handling capacity.
Before mounting
 Keep recorded tapes, watches, and personal credit
cards using magnetic coding away from the A depth of at least 53.5 mm is required to mount the
speaker system to protect them from damage woofer. Measure the depth of the area where you are
caused by the magnets in the speakers. to mount the speaker, and ensure that the speaker is
 Please note the following when installing the units; not obstructing any other components of the car.
otherwise malfunction and/or deterioration in Keep the following in mind when choosing a
sound quality may result. mounting location:
– Do not touch the diaphragms and/or  Make sure that nothing is obstructing around the
ˎ
speaker cones by hand or with tools. mounting location of the door (front or rear) where
you are to mount the speaker.
– Do not put your fingers through the holes
 A hole for mounting may already be cut out of the ˎ
of the frame.
inner panel of the door (front or rear). In this case,
– Do not drop foreign objects in the units.
you need to modify the board only.
Caution  If you are to mount this speaker system in the door ˎ
When using the speakers with an amplifier or power
(front or rear), make sure that the speaker terminals,
booster employing the BTL (balanced transformerless)
frame or magnet do not interfere with any inner
system, be sure to connect the speaker system cords
parts, such as the window mechanism in the door
directly to the amplifier speaker cords. If the connection
(when you open or close the window), etc.
is made through already existing speaker cords which
Also make sure that the speaker grille does not
have a common  lead for both the right and left
touch any inner fittings, such as the window cranks,
channels, it is possible that no sound will be heard, and
door handles, arm rests, door pockets, lamps or
that the amplifier will be damaged.
seats etc.
 The suitable mounting location for the tweeters ˎ
If you cannot find an appropriate mounting
varies depending on the type of car. Choose a
location, consult your car dealer or your nearest
location that suits your car.
Sony dealer before mounting.
Specifications
Speaker: Separate type, 2 way:
Woofer 16 cm cone type
Tweeter 2.5 cm dome type
Short-term Maximum Power* 1 : 350 W* 2
Rated power: 60 W* 2
CTA 2031 RMS Power: 60 W
Rated impedance: 4 Ω
Output sound pressure level: 87±2 dB (1 W, 1 m)* 2
Effective frequency range: 55 – 30,000 Hz*
2
Mass: Woofer:
Approx. 850 g per speaker
Tweeter:
Approx. 80 g per speaker
Passive crossover
network:
Approx. 110 g per box
Supplied accessories Parts for installation
Design and specifications are subject to change without
notice.
* 1 "Short-term Maximum Power" may also be referred to as "Peak
Power."
* 2 Testing Condition: IEC 60268-5 (2003-05)