Advertisement
STEP 1:
(SEE FIGURE 1)
*
Assemble the two 5/8" jam nuts halfway onto the two
5/8" x 2" hex bolts. Screw the bolts into the nuts that are
welded to the Sleeve Hitch Lift Assembly. Tighten the
jam nuts against the welded nuts.
*
Assemble the Lifting Link to the Sleeve Hitch Lift
Assembly using a 5/8" x 1-3/4" hex bolt and a 5/8"
nylock nut. Use the bottom hole in the Lifting Link (gives
the lowest implement depth setting). Tighten the nut
only until snug. Do not squeeze welded arms together.
LIFTING
LINK
518" NYLOCK
NUT
5/8"x 1-314"
HEXBOLT
5/8" JAM
NUT
5/8"x 2"
HEX BOLT
STEP 2: (SEE FIGURE
2)
*
Attach the Sleeve Hitch Lift Assembly to the Sleeve
Hitch Frame Assembly using three 5/8" x 1-3/4" clevis
pins and 3/32" hair cotter pins.
*
Install the Hitch Pin in the sleeve hitch and secure it
with the 5/32" hair cotter pin.
5/32" HAiR
COTTER PiN
(3) 3/32" HAiR
COTTER PiNS
(3) CLEVIS PiNS
FIGURE 2
FIGURE 1
8
Call 1-866-576-8388
for missing parts or assembly help
DO NOT RETURN TO STORE
Advertisement
