Toshiba TOSVERT VF-S15 Instruction Manual page 5

3) Set the following parameters to suit the system.
a) Set the acceleration time and deceleration time to short for quick response within the range not to
cause inverter trip.
Title
acc
dec
.
b) Set the following parameters if necessary.
Item
Limit the input level of
process value.
Switch the PID forward
/reverse characteristics.
Output of agreement signal
between process value
and feedback value.
4) Adjust the PID control gain.
Refer to chapter 5 for details.
a) Fundamental adjustment
Item
PID control gain
b) Adjust the following parameter if necessary.
Item
Start the PID control after
the system becomes
stable.
Acceleration time 1
Deceleration time 1
Title
f367
Process upper limit
f368
Process lower limit
f380
PID forward /reverse characteristics selection
Input terminal function:
54/55: PID characteristics switching
Frequency command agreement detection
f167
range
Output terminal function:
144/145: Signal in accordance of frequency command
Title
f362
Proportional gain
f363
Integral gain
f366
Differential gain
Title
f359
PID control waiting time
4
Function
Function
Function
Function
E6581879