Sharp IM-DR410E Operation Manual page 17

5
Press the MENU/ENTER button.
6
Press the or button repeatedly to se-
lect "REC MODE".
7
Press the MENU/ENTER button.
8
Press the or button repeatedly to se-
lect the recording mode (page 22).
SP (Stereo recording)
(2 times long recording)
(4 times long recording)
(Monaural recording)
9
Press the MENU/ENTER button.
The mode will be set automatically after 7 seconds
even if the MENU/ENTER button is not pressed.
10
Press the button to start the MiniDisc
unit recording.
11
Begin playback on the stereo system, the
output will be recorded.
IM-DR410E TINSE0550AWZZ
Notes:
! Complete the operation within 7 seconds whilst select-
ing the menus.
! Changing the volume level whilst recording does not
affect the recording.
! You cannot adjust the bass level whilst recording.
! Whilst "TOC" is displayed, the MiniDisc recorded con-
tents are not yet updated.
TOC display
To interrupt recording
Press the button.
! To resume recording, press the
button again.
! The track number will be increased by one each time
the recording is interrupted.
To stop recording
Press the :OFF/HOLD button.
When recording is stopped, TOC is written on the MD.
The "TOC" indicator disappears.
03/7/21
IM-DR410E
4
17
IM-DR410E_3.fm