Connecting The Unit To A Pc - Sharp GB201 Operation Manual

Connecting the unit to a PC

HR-GB201
Connect the unit to a PC to transfer audio data. To dis-
connect the unit, see "Disconnecting the unit" on page
14.
Rear
PC
13
HR-GB201 9JCG5230100042
Hard disk
access
indicator
(green)
LINE OUT DSC IN PC
USB connection
cable
To the USB port
1
Turn on the unit (see page 8).
2
Connect the AC adaptor to the DC IN 5V socket
and place the unit on the cradle (see page 7).
3
Connect the unit to a PC with a USB connection
cable.
! The hard disk access indicator (green) flashes.
! Whilst the unit is connected to the PC, the screen
below appears.
Caution:
! It is recommended to use the AC adaptor when con-
necting the unit to a PC. Otherwise data on the unit
may be corrupted when batteries run out.
! Do not disconnect a USB connection cable or remove
the unit from the cradle whilst transferring data from a
PC. Data on the unit may be corrupted.
Note:
The operation buttons on the main unit do not work if it is
connected to a PC. Disconnect the PC to operate on the
unit (see page 14).
04/5/18 HR-GB201_UK.fm