Advertisement
Then, the result table (Fig. 3) is printed.
In case of mismatch, the buzzer emits 9 short tones .
After that, the result table (Fig. 4) is output.
1) If any error occurred, check connection of connector CNOP (check
for bending and breakage of pin of connector), check that the option
memory unit has been mounted as specified, and then turn on again
the power supply, and check.
2) If the same error occurs persistently after the measures stated in item
1 above were taken, replace the option memory unit, and check.
3) If the same error occurs again after the measures stated in item 2)
were taken, check the control PWB.
C N
O P
OPTION MEMORY
PWB UNIT
FO-3MK
ROM/RAM CHECK LIST
M A I N :
R O M
= OK
VER.=FAB0X
VER.=FAB0A
C P U
= OK
S R A M
= OK
D R A M
= OK
P C U :
M / C = 0 0
CONTROL PWB
Fig. 1
OCT–19–1999 TUE 10:43 AM
SUM =DE0E
SUM =1C86
F / W = 4 1 2 2 5 0 G 0 0 1 J 0
Fig. 2
FLASH MEMORY CHECK REPORT
S I Z E = 5MB (With Option Flash memory)
FLASH MEMORY
= OK (15S, 24S, 27S)
BANK CHANGEOVER = OK
B A N K = OK
FLASH MEMORY CHECK REPORT
S I Z E = 5MB (With Option Flash memory)
FLASH MEMORY
= NG (15S, 24S, 27S)
BANK CHANGEOVER = NG
B A N K = NG
– 2 –
FO-3MK
OCT–19–1999 TUE 10:45 AM
Fig. 3
OCT–19–1999 TUE 10:45 AM
Fig. 4
Advertisement
