Siemens CP 1243-1 PCC Operating Instructions Manual page 4

Telecontrol
Table of Contents

Advertisement

Preface
Figure 1
Behind the top hinged cover of the module housing, you will see the hardware product
version to the right of the article number printed as a placeholder "X". If the printed text is, for
example, "1 X 3 4", "X" would be the placeholder for hardware product version 2.
You will find the firmware version of the CP as supplied behind the top hinged cover of the
housing to the left below the LED field.
You will find the MAC address under the lower hinged cover of the housing.
Product names and abbreviations
● Operation center
This abbreviation will be used below instead of the full term "Plant Cloud in the operation
center".
● CP
The term "CP" is used below instead of the full product name CP 1243-1 PCC.
● STEP 7
This short form will be used below for the STEP 7 Basic / Professional configuration tool.
4
CP 1243-1 PCC
Operating Instructions, 02/2015, C79000-G8976-C384-01
CP 1243-1 PCC

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic s7-1200

Table of Contents