Sanyo Sprint VM4500 User Manual page 150

All manuals and user guides at all-guides.com
Setting the Flash Function
To activate the flash function to take pictures clearly in low light:
1. With the phone open and in Camera mode, select Options
(right softkey).
2. Select Flash and press
3. Select an option from the following and press
On This Shot to activate the flash for one shot.
On Always to activate the flash all the time.
4. Take a picture by using the phone's main LCD as a viewfinder.
To deactivate this feature, select Off during step 3.
Tip:
The flash function will automatically be Off when you take a picture with the
clamshell closed.
Setting the Self-timer
To activate the Self-timer and get yourself in on the picture:
1. With the phone open and in Camera mode, select Options
(right softkey).
2. Highlight Self-timer and press
3. Highlight the length of delay you want the timer to use
(10 Seconds or 5 Seconds) and press
4. Press Start (left softkey) when you are ready to start the timer.
( appears on the lower left portion of the main LCD during
the Self-timer countdown.)
5. Get ready for the picture. When the timer is down to three
seconds, the Self-timer icon will turn red and the phone will
begin to beep.
To cancel the Self-timer after it has started:
Press Cancel (right softkey).
Note:
While the Self-timer is active, all keys are disabled except
Cancel
(right softkey).
Tip:
You can also activate the Self-timer in Video mode with same steps.
Section 2: Understanding Your PCS Phone
2J: Using Your Phone's Camera
.
.
.
.
, , and
138