Useful adjustment settings
Input Label
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display.
Press INPUT to select the desired input
1
source.
Press MENU to display the MENU screen,
2
and then press c / d to select "Setup".
Press a / b to select "Input Label", and then
3
press ENTER.
Press a / b / c / d to select the new name for
4
the input mode, and then press ENTER.
INPUT SOURCE
TV
DVD
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
INPUT7
Press MENU to exit.
5
NOTE
• You cannot change labels if the INPUT SOURCE is TV.
Example
Sleep Timer
Allows you to set a time when the TV automatically
switches to standby.
Press SLEEP.
1
• The remaining time displays when the sleep timer
has been set.
Sleep Timer: Remaining
Each time you press SLEEP, the remaining
2
time switches as shown below.
• When set, the time automatically starts counting
down.
• If you want to adjust the sleep timer, you can
press SLEEP twice then change the time
setting.
• Five minutes before the time expires, the
remaining time displays every minute.
Off
120
NOTE
• Select "Off" by pressing SLEEP to cancel the sleep timer.
• The TV will enter the standby when the remaining time
reaches zero.
• When the sleep timer is set, its indicator on the TV lights
red.
30
30
60
90
35