Advertisement
Cradle charger connecting
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied cable conforms to the requirements of the country in which you purchased
your device. Make sure that the power cable is approved for use in the country in which
you intend to use it.
►
Connect the USB cable to the USB connector on the AC adapter.
►
Connect USB cable to the rear of the charging cradle.
►
Connect the AC adapter to the power outlet.
►
Remove the main unit from the attachment.
►
Insert the main unit into the charging cradle.
Align the front surfaces of the main unit and charging cradle, and then insert the main unit until it
locks into place.
When charging starts the main unit status indicator LED turns red.
►
When charging is complete and the main unit status indicator LED turns off, remove the main unit
from the charging cradle.
Fujitsu
<Main unit orientation>
The main unit should be oriented so that the
power button is accessible.
Using the device
19
Advertisement
