Hold Function - Sharp IM-DR400E Operation Manual

Hold Function

IM-DR400E
The operation can be kept even if other buttons are acci-
dentally pressed in a place such as a crowded train.
Hold down the HOLD button for 2 seconds or more.
Hold Release
If the battery is inserted or the AC adaptor is connected,
you can set this function even when the power is turned
off.
To cancel the hold mode
Press and hold down the HOLD button for 2 seconds or
more whilst the unit is in the hold mode.
"HOLD OFF" will be shown.
14
IM-DR400E TINSE0562AWZZ 03/7/21 IM-DR400E_2.fm