Installing The Printer Driver - Sharp AJ-2200 Setup And Operation Manual

INSTALLING THE PRINTER DRIVER

Installing onto Windows Me (USB interface)
Make sure that the printer is connected to your computer by
1
USB cable.
Turn on the printer, and then turn on your computer.
2
"Add New Hardware Wizard" window will appear.
If this window does not appear, ensure to connect the printer and your computer.
If the window does not appear while the printer and your computer is securely
connected by USB cable, refer to "'Add New Hardware Wizard' does not appear
(USB interface)" in "Troubleshooting" of the online manual.
Insert the supplied CD-ROM into your CD-ROM drive.
3
Check the radio button for "Automatic search for a better driver
4
(recommended)", and then click the "Next" button.
Click the "Finish" button.
5
"Add New Hardware Wizard" window will close. Now, you have completed to
install the USB port driver. Before long, "Add New Hardware Wizard" window will
appear again.
24