Advertisement
Trouble Shooting
Problem
No sound
Sound distortion
Sound only from
one channel
Remote control
fails to work
Cause
Improper connection of
speaker terminal.
Improper connection of
sound frequency
terminal.
Improper connection of
AC plug and the socket.
Volume is too low.
The speaker terminal is
short-circuited
Improper connection of
amplifier input terminal.
The volume is too high.
Improper connection of
amplifier input terminal
Input level is too high
The battery has gone
off.
Interference by strong
and direct sunlight.
Solution
Ensure that the equipment
is connected properly.
Ensure that the sound
frequency is connected
properly.
Insert the AC plug securely
into the AC outlet.
Increase the volume with
volume controlling button.
Cut off power, reconnect
the speaker, then start the
power again.
Ensure that the input
terminal is connected
properly.
Lower the volume with
volume controlling button.
Ensure that the input
terminal is connected
properly
Adjust the woofer and
master volume properly
Replace with new
batteries.
Keep the sensor away
from sunlight.
Advertisement
