Other Disc Play Features; To Resume Disc Play After Stopping - Sharp DV-L70BL Operation Manual

Other Disc Play Features

This section explains how to use skip, slow motion, and other play features.
BACKLIGHT VIEW
OPERATE
HI/LOW/OFF MODE
DIGITAL
VIRTUAL
GAMMA
TITLE
MENU
SKIP PLAY
RESUME STOP
DISPLAY REV FWD
CLEAR MEMORY

To resume disc play after stopping

1
While the disc is playing, press Ë STOP at the location where you want to stop.
• Leave the disc in the DVD player. The DVD player remembers the
location where you stopped.
2
To restart play, press RESUME.
• Play resumes from a point slightly before the point where it was stopped.
• This resume operation does not work with PBC (playback control) play of a video
CD with PBC.
• This resume operation may not work with certain types of discs.
This resume operation does not work in the following cases.
• If the main power switch is turned off after disc play is stopped.
• If the DVD player enters the Standby mode after disc play is stopped.
• If you change to the INPUT mode.
• If you remove the disc from the DVD player after disc play is stopped.
• If you display the DVD SET UP screen or disc menu screen after disc play is
stopped.
VIDEO
ADJUST
DIGITAL
S.PICTURE
ENTER
RETURN
RESUME
SKIP
PLAY
STILL/PAUSE
STOP
SLOW
SLOW
REPEAT
FWD
REV
PROGRAM
DIRECT
INPUT/
DVD
PLAY
STOP
59
GB