Sharp Notevision XG-C435X-L Operation Manual page 19

4.
Adjust the angle
Adjust the projector angle
• • • • • Adjust the projector angle using the Height
Adjustment buttons.
• • • • • Rotate the Tilt dial to adjust the horizontal tilt of
the projector.
Height Adjustment
buttons
5.
Adjust the focus and the zoom
Bring the projected image into focus
• • • • • Bring the projected image into focus by
rotating the focus ring.
6.
Select the INPUT mode
Select the "COMPUTER 1" using the INPUT buttons on the projector or the COMPUTER 1 button on the remote control.
On the On the remote
projector
• • • • • When you press the INPUT buttons on the projector, the INPUT list appears.
Press ' ' ' ' ' /" " " " " to select an item on the list, and press ENTER to switch to the selected INPUT mode.
• • • • • When using the remote control, press COMPUTER1/2, DVI, S-VIDEO or VIDEO to
switch the INPUT mode.
7.
Turn the Power off
Press the STANDBY button, then press that button again while the confirmation message is displayed, to put the projector into standby mode.
On the projector
• • • • • Even if you unplug the power cord from the AC outlet, the cooling fan continues to run for a while.
Tilt dial
Focus ring
" " INPUT list " " "
control
INPUT
D
On the remote control
• • • • • This projector is equipped with an "Auto V-Keystone
Correction" function that automatically corrects any
trapezoidal distortion within the projected image.
Adjust the projected image size
• • • • • Adjust the projected image size by moving the
zoom knob.
" " On-screen Display (RGB) " " "
COMPUTER1
COMPUTER2
DVI-D Computer
" " On-screen Display " " "
Pages 31, 32
Zoom knob
Page 33
COMPUTER1
RGB
1024 × 768
Page 34
Page 30
-17