Siemens Landis & Staefa RAV12 Series Operating Instructions

Operating instructions
RAV12 - the temperature controller that allows you to set the ideal room temperature at the time you want.
You can either rely on the factory settings or make settings tailored to your personal needs.
Getting started
Position for 24-hour
time switch AUZ3.1
or weekly time switch
AUZ3.7
Tappet positions
on time switch
Tappet tilted
outward for
normal temperature
Tappet tilted
inward for
economy temperature
The controller is supplied with factory-set switching patterns, switching times and temperatures.
To commission it, proceed as follows:
•
As soon as connected, the controller switches itself on. Caution: 230 V!
•
Set the correct time of day (with the weekly time switch check the weekday!) . Make readjustments if
necessary.
•
Set the operating mode selector to the required position (e.g. AUTO
•
Fold up operating instructions again, place them back into position and close the cover again.
Landis & Staefa RAV12...
Setting knob for
20
normal temperature
25
15
10 30
LED
5
Operating mode
°C
selector
AUTO
15
10 20
5 25
30
°C
2226Z03E
Setting knob for
economy temperature
).
Do you want to use automatic operation?
Do you require normal temperature?
Do you require economy temperature?
Heating periods
according to
Do you require standby with frost
tappet settings
on time switch
protection?
Continuous
normal temperature
Continuous
economy temperature
Standby with
frost protection
Do you feel too warm or too cold?
20
15 25
10
5
°C
15
10 20
5 25
30
°C
Move the operating mode selector to
the position automatic mode. This
ensures heating according to the
patterns set on the time switch.
Move the operating mode selector to
«Normal temperature». This ensures
continuous heating to the normal
temperature.
Move the operating mode selector to
«Economy temperature». This ensures
continuous heating to the economy
temperature.
Move the operating mode selector to
«Standby». In that case, heating is
provided only when the room
temperature falls below the preset frost
protection limit (5 °C).
With the upper setting knob the normal
temperature can be adjusted from 5
30
to 30 °C in steps of approx. ±1 °C.
With the lower setting knob the
economy temperature can be
adjusted from 5 to 30 °C in steps of
approx. ±1 °C.